Sand filter D 600

SKU 50431

Efficient water filtration significantly extends the interval between necessary cleaning tasks in spray fountains, ponds, and other systems.

The crystal quartz sand filter should be operated independently of and parallel to actual spray fountain and circulation technology. The filter can work during fountain operation, in periods when the fountain is not operating, or it can even work around the clock.

The filter system consists of a container made of fibre-glass reinforced plastic and a pump and a multi-port valve. Everything is compact and premounted on a plastic pallet. The fill opening of the filter tank is sealed with a cover and an integrated manometer. The tank can be filled with crystal quartz sand or AFM filter medium and contaminated water is suctioned in by the pump. In the filter the water is forced through the filter material via an upper distributor with sieve and then it is fed back into the pool through a lower distributor with small open-seam pipe. If the filter capacity is exhausted the filter is simply rinsed in reverse and the debris is discharged via the wastewater channel.

Characteristic
- Efficient and environmentally friendly mechanical water filtration
- AFM filter medium significantly extends the cleaning intervals in water systems
- Compilation of individual, holistic solutions consisting of sand filter, quartz sand/AFM filter medium and automatic backwash Eurotronik
- Filter operation possible in parallel to or independently of the operating hours of the system
- Filter complete with container made of glass fibre reinforced plastic, pump and multi-port valve, compact and easy to install pre-assembled on plastic pallet
- Easy cleaning: When the filter is full, the automatic backwash directs the collected dirt into the duct

Technical Data

Dimensions (L × W × H)	mm	1000 × 870 × 1100
Filter tank diameter	mm	600
Filter surface	m²	0.28
Recirculation capacity at 8 m wc	m³/h	13
Filter speed at 8 m wc	m/h	50
Reverse rinse speed	m/h	50
Reverse rinse duration		ca. 2 - 4 Min.
Water requirement per reverse rinse		ca. 650 l in 3 Min.
Grain of the filter material	mm	0.4-1.0
Quantity of the filter material		ca. 125 kg
Max. operating pressure	bar	2.5
Suction-side connection		2"
Pressure-side connection	mm	50
Pressure-side connection		1 ½"
Connection - back-flush	mm	50
Connection - back-flush		1.5
Power consumption	W	970
Rated current	A	4.7
Rated voltage	V	230
Frequency	Hz	50
Protection class		IPX4
Net weight	kg	46.00
Material filter		GRP